Member
Washington
Clean Technology Alliance

GSA Advantage website

Veteran Owned Business

Once the
Boom & Dock Curtain has become saturated with oils, the ballast chain can be removed and it can be centrifuged or passed through a wringer to remove and recover the oils and reused with 85% to 90% efficacy.

VMS Vault Maintenance SystemFilter Sock Vault Maintenance System
"The Future of Vault Dewatering"

  • Removes Visible Oils and oil-borne contaminants such as PCBs.
  • Filters Out Suspended Solids to Below Compliance Levels for the New NPDES II Regulations.
  • See test data

Utility vault water contaminated with oil and suspended solids can be filtered to crystal clean water with one pass through the VMS Filter Sock.TSS Removal = 99.4%
Oil & Grease Removal = NonDetect

State of the Art Filtration Technology to Remove Oil and Sediments from Water

View VMS Training Video
Patented & Patent Pending

  • Filters out oil, oil sheen, oil-borne contaminants, and suspended solids - as fine as rust!
  • Configured as a portable, easy-to-use multi-staged filter sock.
  • Available with or without a quick-connect fitting.
  • Available with a plastic cover to direct water flow.
  • Available in a Haz-Waste liquid-tight container to protect the sock prior to use and to contain any contaminated water after use and prior to disposal
  • Great Flow Rate - 385 gpm at 20 psi

The VMS Filter Sock has a great flow rate

The standard operating procedure for the removal of water from vaults has been to either: Evacuate the contaminated water by pumping it into the environment, risking: regulatory penalties, hefty fines, possible hazmat response, and negative public perception.

Use a vacuum truck for off-site processing which involves: truck expense (if a truck is available), wasted man hours, expensive water disposal costs, and off-site liability at Treatment Storage and Disposal facilities.

You can eliminate the costs associated with vacuum trucks and water processing; you can be within regulatory compliance; and you can help the environment - which not only makes good sense for your company, it helps the bottom line.

Save Money — Save the Environment!
Give us a call toll free 1 (888) 668-8982

Call us today to discuss the suitability of Adsorb-it® for your application.

Toll Free: US 1 (888) 668-8982
International: 001 (253) 884-6804

Contact Information