Adsorb-it Products Remove oil, suspended solids in waste water, stormwater, protect surface waters and shorelines

International Winner Energy Globe World Award for Sustainability

more info

100% Recycled

Reuseable

Eco-Friendly

Most of the
Adsorb-it

Products
may be reused.
Simply remove
the flotation
and other
accessories,
then press,
wring, or
centrifuge to
remove and
recover the
retained oils.
Replace the
flotation and
accessories,
and your
Adsorb-it

Product
is ready to reuse.

Adsorb-it Sorbent Products
Remove Oil, Oil Sheen, Oil-Borne Contaminants from Water
Reusable Products. Made From Waste. Used to Clean the Environment.
Ultimately a Fuel Source. " It doesn't get any greener than that! "

VMS Vault Maintenance System for pumping out electrical vault

NEW!

VMS Vault Maintenance System
A staged filtration system in the form of an easy-to-use filter sock that will allow you to evacuate underground vaults directly into the environment. The system filters TSS and Oil & Grease to below regulatory guidelines.

Filter Socks remove oil, oil sheen and particulates

Filter Socks, all sizes
Item #SFS8-10, #SFS8-5, #SFS5-57, #SFS3-30
A heavy duty double-layered sock from Adsorb-it

Filtration Fabric for filtering silt, oil and oil sheen, or contaminants when flushing pipes, draining excavations, or underground vaults. Four standard sizes in stock. It can be made in any size for your individual needs.

Centipede Control oil and sheen in ditches and piping

Centipede^TM
Item #ETC10-5
Control oil and sheen in ditches and piping. Ideal size for zipper drains. Adsorb-it^® Filtration Fabric encloses a 3” dia. by 5’ long flotation boom with a double layer of 9” long tendrils down each side with a webbing loop at each end and a clip for hooking multiple units together. Webbing runs the full length of the centipede for added strength.

Hula Bug to remove oil and sheen from catch basins and sumps

Hula Bug^TM
Item #EHB19-5, Item #EHB22-10
Control oil and sheen in sumps and catch basins.
A double layer of Adsorb-it® Filtration Fabric on a 3” dia. by 5’ long flotation boom with tendrils reaching 19” deep. The velcro and grommets at each end allow you to form the Hula Bug into a circle, or hook multiple units together for other applications.
Also available in a 10' long unit with a 5" diameter flotation boom and 22" long tendrils.

Filter Boom remove oil from the surface and sub-surface

Filter Boom^TM
Item #EFB21-10
Adsorb-it

fabric floating curtain boom 21" deep by 10' long. For use on any body of water to remove oil and oil sheen from the surface and subsurface. Hook units together to make any length.

ShoreGuard Dumbo Surfer to protect shorelines

Shore Guard^TM "Dumbo Surfer^TM"
Item #MSG5-10
The “Dumbo Surfer” is designed for use in turbulent water and light surf to protect shorelines by capturing and retaining released oils, oil sheen and oil-borne contaminants. They can be interconnected and towed through a release to remove the oil and oil sheen.

Boom & Dock Curtain^TM
Item #MBC15-10
A 15" deep by 10' long Adsorb-it

fabric loop designed to be attached to floating docks, barges, boat lifts, rafts, fence boom, and a variety of other floating media for the on-going removal of oils, oil sheen and oil-borne contaminants that have been released to the water.

Contour Ditch Boom for quick deployment in small waterways and ditches

Contour Ditch Boom^TM
Item #EDB24-5
Adsorb-it

fabric curtain boom 24" deep by 5' long, for quick deployment in small waterways and ditches. It has a 3" flotation boom in head, and ballast chain in the bottom to allow it to conform to the shape of the bottom of the ditch or waterway.

Oil Sweep to mop up small oil and fuel releases

Oil Sweep^TM
Item #MOS12-30, #HOS-24, #HSH-60F
Mop up an oil or fuel spill on boat decks, in the shop, garage, or warehouse. Use the Oil Sweep any place that would normally require hands-and-knees placement and removal of sorbent pads. The complete unit is comprised of three parts: the Oil Sweep Cover, the Standard Frame, and the Fiberglas Handle.

Fabric

Adsorb-it Filtration Fabric
Item #AF11-2, #AF11-5
Adsorb-it

fabric is made with X-Tex

100% recycled select fibers from the textile industry; designed with the unique ability to allow the virtually unrestricted flow of salt or fresh water through the fabric at rates in excess of 100 gallons per minute per square foot while retaining oils, oil sheen, and oil-borne contaminants in the fabric matrix. Available in 250' rolls 2' wide and 5' wide.

We take pride in the quality of our Adsorb-it Products. We use only the finest
materials in their construction. Our thread is a heavy duty polyester that is impervious to prolonged exposure to the elements and contaminants. Our designs are well thought-out, and based on over 30 years experience in the environmental industry. We will stand behind all of our products because our workmanship is top quality. We welcome input from our customers, and will work with you to create products for your specific needs.
Give us a call Toll Free 888-668-8982.

Global Distributors of Award Winning

Sorbent Products

updated 10/10/08